Step Motor Driver

Detailed Product Description
Q3HB64MA introduction:
Q3HB64MA is a constant angle and constant torque microstepping driver. This type of drivers supplies regulated phase current for voltage from 12V-40V DC. It is designed
for use with the 3-phase hybrid stepper of all kinds with 42-86mm outside diameter
and 5.8A current max. The circuity it adopts is similar to the circuit
of servo control in theory which enables the motor run smoothly at low speed nearly
without vibration and noise, output much greater torque at high speed than 2-phase
and 5-phase hybrid stepper. The precision of location is up to 60,000 steps/rev.
Features:
High reliability, low cost
16 channel constant angle constant torque microsteps. Highest resolution up to 60,000
steps/rev
Unique control circuitry
Highest response frequency up to 200Kpps
Winding current will be reduced to set value when no step pulse command is received
for 0.1 seconds
Bipolar constant current chopping mode
Optically isolated signals I/O
Driver current is continually adjustable from 0.5A/phase to 5.8A/phase
Single power supply (DC12-40V)

Q3HB110M introduction:
Q3HB110M is a constant angle and constant torque microstepping driver. This type of drivers supplies regulated phase current for voltage from AC40-110V. It is designed
for use with the 3-phase hybrid stepper of all kinds with 86-110mm outside
diameter and 5.2A current max. The circuity it adopts is similar to the circuit
of servo control in theory which enable the motor run smoothly at low speed nearly
without vibration and noise, output much greater torque at high speed than 2-phase
and 5-phase hybrid stepper. The precision of location is up to 30,000 steps/rev.
Features:
High reliability, low cost
16 channel constant angle constant torque microsteps. Highest resolution up to 30,000
steps/rev
Unique control circuitry
Highest response frequency up to 200Kpps
Winding current will be reduced to set value when no step pulse command is received
for 0.1 seconds
Bipolar constant current chopping mode
Optically isolated signals I/O
Driver current is adjustable from 0.3A/phase to 5.2A/phase divided into 16 parts
Single power supply (AC 40-110V)
Phase remembering function

Q3HB220M introduction:
Q3HB220M is a constant angle and constant torque microstepping driver. This type of driver supplies regulated phase current for voltage from AC110-220. It is designed
for use with the 3-phase hybrid stepper of all kinds with 86-110mm outside diameter
and 5.2A current max. The circuity that it adopts is similar to the circuit of
servo control in theory which enable the motor run smoothly at low speed nearly
without vibration and noise, output much greater torque at high speed than 2-phase
& 5-phase hybrid stepper. The precision of location is up to 30,000 steps/rev.
Features:
High reliability, low cost
16 channel constant angle constant torque microsteps. Highest resolution up to 30,000
steps/rev
Unique control circuitry
Highest response frequency up to 200Kpps
Winding current will be reduced to set value when no step pulse command is received
for 0.1 seconds
Bipolar constant current chopping mode
Optically isolated signals I/O
Driver current is adjustable from 0.3A/phase to 5.2A/phase divided into 16 parts
Single power supply (AC110-220V)
Phase remembering function